audio shit

[farmerehsan]

i knooo i knooo but fucking ca isnt responding at all i rreally needz help

ok im redoing alot of things...

need help on this..

i am running 4 speakers to a 2 channel amp and am thinkin of going with the apline v12 mrv-f300 4 channel

the 2 channel im running now is the JL audio e2150

the speakers i have are:

6.5 (2) are tr650-cwi
http://i92.photobucket.com/albums/l27/farmerehsan/utf-8BVW5uYW1lZC5qcGc-4.jpg

and


2 6x9 Model # T6.9F3 3 way speaker
http://i92.photobucket.com/albums/l27/farmerehsan/DSCN0488.jpg
http://i92.photobucket.com/albums/l27/farmerehsan/DSCN0492.jpg






WOULD IT be louder if i went with that 4 channel amp?

[slim8605]

Link to both amp specs? I'm kind of lazy

[JimJ]

:duh:

[slim8605]

There's a section for this kinda stuff :fyi:

[JimJ]

:ohyeah:

[farmerehsan]

http://www.sonicelectronix.com/item_4811_JL+Audio+e2150.html

jl

and the apline:
300 Watt Digital Amplifier
Bridgeable
4, 3, or 2 Channel Power
Preamp inputs
Built in adjustable Xover 50-200Hz hp/lp
THD at rated power 4ohm
0.04% -Mod dc-dc p/s with MOSFET Frequency
Response - 10Hz to 50Khz +/- 1db
No current limiting
S/N ratio - 100dBA
Input mode selector (MONO/ST/L+R)
Input Sensitivity - 200mv to 4.0V
Gold Plated RCA input/output and screws
Thermal Overload Protection

the series I alpine V12 4-channel amps are typically 20~30% underrated powerwise. so whilst it's rated at 4x30WRMS at 12V, it should realistically produce close to 40WRMS per channel at 4ohm.

[UCP]

FAIL!

[farmerehsan]

There's a section for this kinda stuff :fyi:

sry i forgot

[farmerehsan]

FAIL!

suck my chicken nugget

[UCP]

Only after you suck my tater tot faggot.

[IDSkot]

Here's some logic for you, buddy...

If you have 2x 4-ohm drivers, if you wire them in parallel, they equal 2 ohms. If 2-channel amp is 2-ohm stable and gives out more power than each channel of the 4-channel amp, then, it will be louder.
ZOMGZEIGHEIST!

[UCP]

Here's some logic for you, buddy...

If you have 2x 4-ohm drivers, if you wire them in parallel, they equal 2 ohms. If 2-channel amp is 2-ohm stable and gives out more power than each channel of the 4-channel amp, then, it will be louder.
ZOMGZEIGHEIST!


PLEASE.



SHUT THE FUCK UP!

[slim8605]

PLEASE.



SHUT THE FUCK UP!

LMAO

[farmerehsan]

so the 4 channel is only 10 watts greater?

[slim8605]

If you can actually get the 14v power listed you would be getting more power with the 2 channel but I would take a 4 channel just for more control.

[UCP]

+1

[farmerehsan]

i cant even really get 12 volts i got so much shit in that truck...so the 4 channel would be better?

[UCP]

FAIL!

[slim8605]

FAIL!

This

In my personal ride I would go with the 4 channel. Actually I would go a little bigger. Is there a reason why you are limited to these amps?

And get that voltage up son!

[IDSkot]

PLEASE.



SHUT THE FUCK UP!

:ohyeah:

I'm so happy they added that.


And OP: Get the voltage up. Big 3's your friend...

[farmerehsan]

This

In my personal ride I would go with the 4 channel. Actually I would go a little bigger. Is there a reason why you are limited to these amps?

And get that voltage up son!

im pretty sure its at 12.... well the JL amp is what i had...then picked the 4 channel up and might sell it...but would it really make a difference?

[slim8605]

Sell em both and get something better. How much can those speakers handle anyway?

A) Do you plan on tuning at all or B) do you just want it installed and loud?

A) 4 channel
B) 2 channel even though I'm not really sure if it will even make a noticeable difference.

[farmerehsan]

1. i dont have monies... i cant even sell any of em ..maybe ebay

idk how much the 6.5's can take but i think the 6x9 will do : Rec. Amplifier Power: 50W - 120W

[farmerehsan]

i just want it to be loud...i have a 15 and sometimes it dosent get that high., i will also add tweets later

[UCP]

my 6.5's move my kidneys and are MORE than loud enough.

[farmerehsan]

what u have

[UCP]

Poly mids in properly treated doors.

[farmerehsan]

hmm my doors and deadened at all cuz idk how long im going to keep this truck

[IDSkot]

im pretty sure its at 12.... well the JL amp is what i had...then picked the 4 channel up and might sell it...but would it really make a difference?

10 watts per speaker? A bit.

BUt, you should get your voltage to 13.8. My stock voltage is 14, and I have a '98 Mustang.

[IDSkot]

my 6.5's move my kidneys and are MORE than loud enough.

Your kidneys are weak. :fyi:

[farmerehsan]

10 watts per speaker? A bit.

BUt, you should get your voltage to 13.8. My stock voltage is 14, and I have a '98 Mustang.

i have alot of lights and shit on the truck,...i will be adding another red top or yellow top soon, hope that helps..if i do that the 4 chan will be better?

[slim8605]

10 watts per speaker? A bit.

BUt, you should get your voltage to 13.8. My stock voltage is 14, and I have a '98 Mustang.

This

At 12v he won't be getting 10w per speaker.

[IDSkot]

i have alot of lights and shit on the truck,...i will be adding another red top or yellow top soon, hope that helps..if i do that the 4 chan will be better?

Why do you have all those lights on at the same time?

[slim8605]

For partys

[farmerehsan]

i dont hav ethem on at the same time.. i run my 2 head lights and a 2hellas at once.. the other 5 up top stay off. the 2 other hellas are not connected yet..the 2 in the back stay off... i also have cb whihc uses almost no power,

an indash, a compressor in the back, and vavles for the train horns...

why is my voltage so bad?

[IDSkot]

i dont hav ethem on at the same time.. i run my 2 head lights and a 2hellas at once.. the other 5 up top stay off. the 2 other hellas are not connected yet..the 2 in the back stay off... i also have cb whihc uses almost no power,

an indash, a compressor in the back, and vavles for the train horns...

why is my voltage so bad?

Because as V --> 0, W-->0

[farmerehsan]

huh lol

[IDSkot]

huh lol

it represents an Algebraic formula...

As V (volts) approaches 0, W (watts) approaches 0.

[farmerehsan]

i kno..but why is that.. all i run is 2 lights.. i stay around 12 ...but tends to dim and fluxuate

[slim8605]

Low voltage = low wattage.

And its not good for your amp unless you like them extra crispy

[slim8605]

Those lights are either drawing a lot of power or you have wiring issues somewhere

[farmerehsan]

they go strait to the battery i believe they are 55 watts each..just the 2 hellas

[bunkerking09]

sad thing is we might help each other here. over at CA we are just assholes lol

[Spider Monkey]

sad thing is we might help each other here. over at CA we are just assholes lol

Fuck you

[bunkerking09]

Fuck you

i still love you, even though you are a kicker rep :monkey:

[JimJ]

sad thing is we might help each other here. over at CA we are just assholes lol

Helpful?

:loco:

Nope...

[Spider Monkey]

i still love you, even though you are a kicker rep :monkey:

Kicker is the best audios company ever. :fyi:

[IamDeMan]

Kicker is the best audios company ever. :fyi:

Even thought they fired you? I wouldn't let your current company JL know about this.

[Spider Monkey]

Even thought they fired you? I wouldn't let your current company JL know about this.

JL is above ranking. They are like a god among men.

[IDSkot]

sad thing is we might help each other here. over at CA we are just assholes lol

Fuck you. Neg rep.

[UCP]

Your kidneys are weak. :fyi:

Lulz. You're right, I know not of pressure. Good one kid.

[dragnix]

I just want to take a gun to those 6x9s

[farmerehsan]

why

[JimJ]

Why not?

[tapout]

Fuck you
this

[tc3k101]

gay