Box for a 15" BTL

[97gp]

SO im going to be running a 15" BTL and it is going to be running on 1000 watts and then sometime in the future I will be getting a new amp or adding another to give it like 2000 watts. So what size enclosure would you recommend and what tuning to make the BTL bump like WHAT!!! on only 1000 watts???

[J31Bro]

Big & tuned low. TLine maybe? That oughta make the power handling suffer.

[Uncle Rico]

Purely a guess but. 4.5 @ 32?

[97gp]

I think im gonna go with an aeroport to save on enclosure size now what should I face things, right now I have sub back and the port firing into the cabin which is pretty hot.

http://i274.photobucket.com/albums/jj261/g7gp/371c06f2.jpg

[J31Bro]

Purely a guess but. 4.5 @ 32?
Little small for the power he's got on tap IMO.

[97gp]

Little small for the power he's got on tap IMO.

Say what FI recommends 3-5ft so hes already in the upper end

[Uncle Rico]

Little small for the power he's got on tap IMO.

Not really. He's only got 1k right now.

[J31Bro]

Say what FI recommends 3-5ft so hes already in the upper end

Not really. He's only got 1k right now.

We all seen BTLs take 3-4kw daily.. I'd say 1kw + a big box (5-6 cubes) isn't out of the question..

[fbi90909]

fag, you need more powa for a btl..

[fbi90909]

YouTube- 15" BTL on 2 Saz-1500d's flexin the Civic.

[J31Bro]

fag, you need more powa for a btl..
nG talked him into it for his benefit rather than 97's.

[97gp]

fag, you need more powa for a btl..
Eventually
nG talked him into it for his benefit rather than 97's.

:confused: I didnt but anything from him

How about 5@32 like dis?

http://i274.photobucket.com/albums/jj261/g7gp/Untitledfffffffffff.png

[J31Bro]

Eventually


:confused: I didnt but anything from him

How about 5@32 like dis?

http://i274.photobucket.com/albums/jj261/g7gp/Untitledfffffffffff.png

Thought nG was trying to sell you on his in the other thread.

5 cubes is more realistic for a 15" BTL on 1kwrms.

[97gp]

Word, you think firing the port into the cabin is better/worse than firing to the side or both back?

[Uncle Rico]

My friends grand am was 2 dbs louder firing into the car. But its all vehicle dependent honestly.

[97gp]

My friends grand am was 2 dbs louder firing into the car. But its all vehicle dependent honestly.

Grand ams and Grand Prixs are pretty similar so I will probably stay with firing into the cabin

[J31Bro]

Grand ams and Grand Prixs are pretty similar so I will probably stay with firing into the cabin
Meh, I've personally always had better luck firing sub & port back.. then again, I'm not about to seal it off from the trunk either.. too much work for too little gain IMO.

[97gp]

So does this mean I can turn the gain on my amp all the way up and clip the hell out of it since the BTL can take it?

[Uncle Rico]

Whoaaaa there.

[J31Bro]

So does this mean I can turn the gain on my amp all the way up and clip the hell out of it since the BTL can take it?
How well did that work with your last Fi sub..

[Twistedchild420]

Well hell

[97gp]

How well did that work with your last Fi sub..

never did that brah, if this sub didnt have a rip in the surround that I glued together it would still be in perfect condition.

[J31Bro]

never did that brah, if this sub didnt have a rip in the surround that I glued together it would still be in perfect condition.
Imjustsayin'.

You could still fix that Q if you weren't a huge pud.

[Twistedchild420]

never did that brah, if this sub didnt have a rip in the surround that I glued together it would still be in perfect condition.

Sell me the Q cheaps

[ngsm13]

nG talked him into it for his benefit rather than 97's.
Neggers.

Didn't buy my sub... :fyi:... try to keep up

nG

[J31Bro]

Neggers.

Didn't buy my sub... :fyi:... try to keep up

nG
Even worse. He bought a sub that everyone thinks you can abuse to all hell from someone who most likely doesn't know the limits of abuse.

[J31Bro]

Sell me the Q cheaps
Already sold it to me. :grin3:

[ngsm13]

Never have port and sub on opposite faces (180 degrees)... good way to get cancellation... terrible idea...

nG

[ngsm13]

In all seriousness, for space reasons, I'd do sub back and ports to the side. Aeroports, three 4" tuned ~33hz.

If you can fit it 4.5 cubes, go for it, if not 4 cubes NET will do well.

nG

[97gp]

Imjustsayin'.

You could still fix that Q if you weren't a huge pud.
Which I will
Sell me the Q cheaps
No
Even worse. He bought a sub that everyone thinks you can abuse to all hell from someone who most likely doesn't know the limits of abuse.
Come on whats the worst a clipped 1000 watts can do to it?
Already sold it to me. :grin3:
No
Never have port and sub on opposite faces (180 degrees)... good way to get cancellation... terrible idea...

nG

What about port on the side brah, like 90 degrees?

[ngsm13]

See above poast. :fyi:

nG

[fbi90909]

wait, what car is this going in?

[ngsm13]

A 1997 Grand Prix?

nG

[Twistedchild420]

Which I will

No

Come on whats the worst a clipped 1000 watts can do to it?

No


What about port on the side brah, like 90 degrees?

Fuck you

[fbi90909]

hm.. they got pretty big trunks. 3x 4" aeros should do well though your gonna need a big big box to compensate for port displacement..
i'd rather kerf port it instead of running aeros.

[J31Bro]

hm.. they got pretty big trunks. 3x 4" aeros should do well though your gonna need a big big box to compensate for port displacement..
i'd rather kerf port it instead of running aeros.
boner.

[ngsm13]

hm.. they got pretty big trunks. 3x 4" aeros should do well though your gonna need a big big box to compensate for port displacement..
i'd rather kerf port it instead of running aeros.
Aero's don't displace shit... all three are ~.4cubes total...

nG

[fbi90909]

at what tuning?

[J31Bro]

In all seriousness, for space reasons, I'd do sub back and ports to the side. Aeroports, three 4" tuned ~33hz.

If you can fit it 4.5 cubes, go for it, if not 4 cubes NET will do well.

nG

at what tuning?
:fp:

[fbi90909]

:fp:

shush you. this is a thread for audio enthusiast.

[97gp]

In all seriousness, for space reasons, I'd do sub back and ports to the side. Aeroports, three 4" tuned ~33hz.

If you can fit it 4.5 cubes, go for it, if not 4 cubes NET will do well.

nG
So in winisd it shows for three 4" ports vent length is ~17.5, so each port is 17.5 or the combined length of all the ports is ~17.5?
A 1997 Grand Prix?

nG
Give me some credit ive stepped up to a 2001 grand prix
hm.. they got pretty big trunks. 3x 4" aeros should do well though your gonna need a big big box to compensate for port displacement..
i'd rather kerf port it instead of running aeros.

Well I was hoping to be able to get away with just 1 6" port but I guess I can see how that wouldnt be enough.

[fbi90909]

So in winisd it shows for three 4" ports vent length is ~17.5, so each port is 17.5 or the combined length of all the ports is ~17.5?

Give me some credit ive stepped up to a 2001 grand prix


Well I was hoping to be able to get away with just 1 6" port but I guess I can see how that wouldnt be enough.

17.5 each

and yeah 1 6 would be too little. still, kerf is sexier..

[J31Bro]

shush you. this is a thread for audio enthusiast.
Oh. WTF is audio..

[J31Bro]

17.5 each

and yeah 1 6 would be too little. still, kerf is sexier..
It'll be in a trunk. :fyi:

but hey, I'll meet you half way w/that comment:
http://i128.photobucket.com/albums/p170/J31Rob/12v/S5000492.jpg

[97gp]

17.5 each

and yeah 1 6 would be too little. still, kerf is sexier..

I dont ride pop trunk :fyi:

[ngsm13]

So in winisd it shows for three 4" ports vent length is ~17.5, so each port is 17.5 or the combined length of all the ports is ~17.5?

Give me some credit ive stepped up to a 2001 grand prix


Well I was hoping to be able to get away with just 1 6" port but I guess I can see how that wouldnt be enough.

17.5" each port. Also, remember that is total length per port, each flared flange accounts for 3" of length. So, the pvc tube would need to be 11.5"

nG

[fbi90909]

you could
http://i110.photobucket.com/albums/n104/fbi90909/c22e23e4.jpg

[fbi90909]

It'll be in a trunk. :fyi:

but hey, I'll meet you half way w/that comment:
http://i128.photobucket.com/albums/p170/J31Rob/12v/S5000492.jpg

aren't you running 12's??

1 6" for a 15 is too small..

[ngsm13]

And you realize with sub and port displacement, you're going to need ~5.1cubes INTERNAL...

nG

[97gp]

17.5" each port. Also, remember that is total length per port, each flared flange accounts for 3" of length. So, the pvc tube would need to be 11.5"

nG

Guess ill order up 3 of these bitches then http://www.parts-express.com/pe/showdetl.cfm?Partnumber=268-352

[97gp]

And you realize with sub and port displacement, you're going to need ~5.1cubes INTERNAL...

nG

Yes, I mean that last one I just posted was 5.75 internal so your route will be easier on my trunk.

[ngsm13]

Why so big?

nG

[fbi90909]

maybe bracing? :confused2:

[97gp]

Why so big?

nG

Well people in this thread were saying go with a big enclosure and I was complying, I guess bdawg was right with his initial recommendation of 4.5@32

[fbi90909]

my btl was in 4.0-4.2 after displacement. ran great. handled powas like a champ. broke my trunk to shit, and then got old. :p

[97gp]

my btl was in 4.0-4.2 after displacement. ran great. handled powas like a champ. broke my trunk to shit, and then got old. :p

But you were giving it more than 1000 watts. So could I buy another sae-1000d and put one on each coil or would that not work? or like strap them or something???

[fbi90909]

if i were you, try to sell the sae1k and pick up 2x saz15's or a saz3k.
i strapped my saz15d's for my 3k load.
i sold both amps later on and picked up the saz3k for the lms54

edit: ehhhhhh though going for 3k will require a bit more electrical upgrade. 2k should be sufficient and shouldn't need too much of electrical upgrades. i guess you could go 2 sae1's and strap them. one amp turns into the neg, the other amp turns into the pos, wire sub as normal.

[97gp]

if i were you, try to sell the sae1k and pick up 2x saz15's or a saz3k.
i strapped my saz15d's for my 3k load.
i sold both amps later on and picked up the saz3k for the lms54

To much monies buying another one would probably be the cheapest option, its tough trying to be a baller on a budget

[J31Bro]

aren't you running 12's??

1 6" for a 15 is too small..
That's my old 18" box. 2 6" ports.

[97gp]

I feel as if I might have to build the box in the trunk

[fbi90909]

it's not hard to do so. i've built 2 in my trunk..

[97gp]

Oh word I wouldnt be to concerned but what is the process since you cant really screw it together or clamp it?

[Uncle Rico]

Well people in this thread were saying go with a big enclosure and I was complying, I guess bdawg was right with his initial recommendation of 4.5@32

See.

[J31Bro]

I'd rather design a box around my max dimensions the openings of either side of my trunk provide.. then you don't have to work IN your trunk.

[97gp]

See.
Thats why we call you draino
I'd rather design a box around my max dimensions the openings of either side of my trunk provide.. then you don't have to work IN your trunk.

Cause you're a woman, go big or go home.

[J31Bro]

See.
Homie, don't play dat.

Everyone has their own opinions & stories about what has worked for them.. as a general rule, if you're low on power, up the box space. He's low on power & he's got a solid suspension. He's gotta do something to get it to move moar.

[Uncle Rico]

No need in that if he's gonna step the power up later.

[97gp]

No need in that if he's gonna step the power up later.

Hopefully within a month or two

[J31Bro]

Thats why we call you draino


Cause you're a woman, go big or go home.
I had an 18" in a 93 Corolla.

Peep flex in HD bish.
YouTube- Flexin' Hard pt. 2

[J31Bro]

No need in that if he's gonna step the power up later.

Hopefully within a month or two

I'd rather spend the extra $30 to build two boxes than to go a month or two with a sub that I can barely get to move.

[Uncle Rico]

I bet it'll be plenty loud.

[97gp]

I'd rather spend the extra $30 to build two boxes than to go a month or two with a sub that I can barely get to move.

It will move brah cause the gain will be all the way up clipping which will come out to be like 2000 watts duhhh!

[J31Bro]

I bet it'll be plenty loud.
Probably.. but I'm almost positive it'll have a "choked" sound. Up to him ultimately. He can decipher through all this bullshit and make a knowledgeable decision.. this isn't Gore we're talking to. :keke:

[J31Bro]

It will move brah cause the gain will be all the way up clipping which will come out to be like 2000 watts duhhh!
Fuck yeah. Put it in like 1.3 cubes then. Heard BTLs do gnarly numbers in 1.3 on 2k. Scott from Fi told me this himself.

[97gp]

Fuck yeah. Put it in like 1.3 cubes then. Heard BTLs do gnarly numbers in 1.3 on 2k. Scott from Fi told me this himself.

You're getting too silly now, I may have to ask you to leave my thread.

[J31Bro]

You're getting too silly now, I may have to ask you to leave my thread.
Sorry. :emo:

[97gp]

Its cool, just show some respect for my limited power im sure it wont be that terrible.

[J31Bro]

My bad man.. I won't slip up again.. I promise.

[fbi90909]

here's what i did.after i had my box dimensions to us the max height and width available IN the trunk(run a double baffle, inner baffle to be SANDWICHED in all the exterior sides, the outer baffle to go from edge to edge)
i went out and bought a bunch of L brackets. you can get them from home depot. i found mine in the Deck/wood area. something like this
http://www.firstqualitymusic.com/p_52.aspx?source=FROOGLEFEED
the ones i bought had 4 holes on each side.

basically, pre-build the box outside of the car with NO glue. if you can get the L brackets in 2"x2" with 4 holes only screw in 2 of those screws to hold up each side. after you have it all box panels "locked" in place mark each location of the L brackets, just trace around the bracket.
when you are ready, unscrew everything.
lay a thick garbage bag on the floor of your trunk, lay your bottom peice, screw in the L brackets for the back board, screw in the prescrewed but not tight. lay your glue, screw in the back panel to the L bracket and tighten it down while screwing in all the remaining screw holes that weren't pre screwed. wipe off the excess glue. don't worry if glue gets on the L brackets. i would keep them in there as addition bracing for the enclosure in general.
add the L brackets for a side panel on the bottom, and carefully on the side of the back, add lots of glue to the areas that will be making contact to the side board and then lay your boards and tighten everything down. then work your way around the box.
do bottom, back, left, right, you can either get the top panel here or you can start with 1 of the baffles. though, if you add a baffle you'll be working through a 15" hole.
anyways as you get your panels in add glue to the seams. let dry and keep adding glue to the seams till you seal it up.


note: be sure you have your port openings done before you start assembly. would be a disaster trying to cut open port holes on an assembled in trunk box.

i know it's a little confusing, but look at my tc build. you'll kinda see how i built the box in the trunk.

[97gp]

Ahh, very helpful, L brackets are a good idea.

[Twistedchild420]

Will not be loud

[97gp]

Will not be loud

Suck my dick

[Twistedchild420]

Suck my dick

Sorry.....too quiet .....get loud first

[97gp]

Sorry I dont live on welfare so I cant get loud.

[Twistedchild420]

Sorry I dont live on welfare so I cant get loud.

Well ya better figure something out....quiet shit is quiet yo

[J31Bro]

He's gonna wish he had 2 3hp 12s & a Sundown 3k.

[fbi90909]

Well ya better figure something out....quiet shit is quiet yo

maybe he can add 200 super tweeters.. be loud one way or another.

[adio]

maybe he can add 200 super tweeters.. be loud one way or another.

fuk dat!! use 100 ultra tweeters....

[97gp]

He's gonna wish he had 2 3hp 12s & a Sundown 3k.
Maybe if I was a queer I would.
fuk dat!! use 100 ultra tweeters....

You're out of control tonight.

[Twistedchild420]

Yes....maybe a horn in the grill....they will surely hear him coming.....distorting down the block

[fbi90909]

Yes....maybe a horn in the grill....they will surely hear him coming.....distorting down the block

better to be loud one way or another.
not to get racial or anything, but i find it funny that when i interact with people getting into car audio here it's always the black people that wanna get loud tweeters or that loud tweeters are essential to a car audio system.

[Twistedchild420]

better to be loud one way or another.
not to get racial or anything, but i find it funny that when i interact with people getting into car audio here it's always the black people that wanna get loud tweeters or that loud tweeters are essential to a car audio system.

My good buddy chicken(black....obviously) was telling me i should put horns/tweets in my grill.......i wanted to slap the shit out of him.....shit's mad gay son

[fbi90909]

hahaha

[evildave101]

SO im going to be running a 15" BTL and it is going to be running on 1000 watts and then sometime in the future I will be getting a new amp or adding another to give it like 2000 watts. So what size enclosure would you recommend and what tuning to make the BTL bump like WHAT!!! on only 1000 watts???

Grand ams and Grand Prixs are pretty similar so I will probably stay with firing into the cabin

wait, what car is this going in?

A 1997 Grand Prix?

nG

lulz

[darthvibrator]

I had an 18" in a 93 Corolla.

Peep flex in HD bish.
YouTube- Flexin' Hard pt. 2 (http://www.youtube.com/watch?v=x8z8ZDmzXBE)

dog, a fucking cornfield?

[JimJ]

17.5 each

and yeah 1 6 would be too little. still, kerf is sexier..

Kerfed ports are for people who are too lazy to do it properly with a CNC.

[ramos]

Kerfed ports are for people who are too lazy to do it properly with a CNC.

Aight jimmy jam, where are you finding slabs of mdf big enough to mill ports out of?

[97gp]

OHHHHHHHHHH sick burn!!!!

[brynm]

I do like the look of a nicely done kerf'd box

http://memimage.cardomain.com/ride_images/3/2517/2621/31291310419_large.jpg

http://memimage.cardomain.com/ride_images/3/2517/2621/31291310435_large.jpg

[ngsm13]

I do like the look of a nicely done kerf'd box

http://memimage.cardomain.com/ride_images/3/2517/2621/31291310419_large.jpg

http://memimage.cardomain.com/ride_images/3/2517/2621/31291310435_large.jpg

Not worth the time.

nG

[97gp]

This is about 4.5@33, anything I should change?

http://i274.photobucket.com/albums/jj261/g7gp/Untitledsssssss.png

[fbi90909]

in the design, add the lines for where the wood cuts n shit. even on the outside. that'll give you an idea of how to preplan with building your box in the turnk(if you're still going that route)

[97gp]

in the design, add the lines for where the wood cuts n shit. even on the outside. that'll give you an idea of how to preplan with building your box in the turnk(if you're still going that route)

Oh word, it is im just trying to keep the height down which is why the baffle is like that.

[jesus]

I'd tune lower. Just an opinion though.

[97gp]

I'd tune lower. Just an opinion though.

Then my ports need to be longer :fyi:

[fbi90909]

33 is fine. i ran my BTL at 33hzand it was alright.

[ngsm13]

33 is fine. i ran my BTL at 33hzand it was alright.
+1

Actually, it's FANTASTIC.

nG

[97gp]

So are the ports fine like that or should they placed in any type of particular way?

[fbi90909]

no bueno, you need to space it out cause of the port flares.
don't worry about it now, when you actually build the box you can then see where the ports will all sit and space out between each other.

[97gp]

Gotcha, didnt know if it would be better to group them or spread them out to the corners.

[ngsm13]

Yeah, and use actuale aero-ports too... not just PVC.

Did you read earlier where each flare accounts for 3" of the total port length? So take your total length, subtract 6", and that's what your PVC needs to be.

nG

[97gp]

Dang son! Thats some useful info and I figured I would order these unless you have a better recommendation

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=268-352.

[ngsm13]

Yup, Precision ports are where it's at...

nG

[J31Bro]

Yeah, and use actuale aero-ports too... not just PVC.

Did you read earlier where each flare accounts for 3" of the total port length? So take your total length, subtract 6", and that's what your PVC needs to be.

nG

..or if you can find thinwall PVC, that's all aeros are. I used some on an 18" box build.. PSP fittings fit and the thinwall was the same, if not thinner.

[J31Bro]

Dang son! Thats some useful info and I figured I would order these unless you have a better recommendation

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=268-352.
:grin3:

[jesus]

..or if you can find thinwall PVC, that's all aeros are. I used some on an 18" box build.. PSP fittings fit and the thinwall was the same, if not thinner.

We've seen your boxes. :laugh:
j/k

[J31Bro]

We've seen your boxes. :laugh:
j/k
Fuck yo j/k.

Tell me ONE thing wrong w/any of my boxes?

[slim8605]

http://i128.photobucket.com/albums/p170/J31Rob/12v/IMG_9658.jpg

http://i128.photobucket.com/albums/p170/J31Rob/12v/IMG_9661.jpg

http://i128.photobucket.com/albums/p170/J31Rob/12v/IMG_9660.jpg

[jesus]

SNAP!

[slim8605]

Nothing wrong.

[J31Bro]

It's sealed up, designed correctly, ready for carpet.. only thing I see wrong w/it is the port opening & port piece aren't routed/rounded.. and even that's not a necessity.

[jesus]

My comment wasn't a response so much as me simply stating "It's a SNAP for JRob to build bad ass boxes." :fyi:

[jesus]

My box is sexy :fyi:

[J31Bro]

Then I agree.

[J31Bro]

Pics of said bawx?

[ngsm13]

..or if you can find thinwall PVC, that's all aeros are. I used some on an 18" box build.. PSP fittings fit and the thinwall was the same, if not thinner.

I just meant actual flared ports...

Not PVC stuck in a round hole...

nG

[jesus]

Yah James. That's not what he meant :fyi:

[fbi90909]

or have yours made.
http://i110.photobucket.com/albums/n104/fbi90909/100_0485.jpg

these were made for when i glassed an enclosure.

[IamDeMan]

Needs moar flair.

[jesus]

Yes, I don't think he understands how this works.

[fbi90909]

Lul. Those ports are in the garbage.

[JimJ]

Someone mention a flare?

http://i21.photobucket.com/albums/b252/danniissexy/coney.jpg

[Spider Monkey]

:brrr:

[JimJ]

Indeed.

[97gp]

So I was bored today and just made a temp box which is only 4.1@33 and got damn louder than my Q fo sho, once I double the power, recone it, and make a proper box this bitch is gonna be bangin.

[fbi90909]

So I was bored today and just made a temp box which is only 4.1@33 and got damn louder than my Q fo sho, once I double the power, recone it, and make a proper box this bitch is gonna be bangin.

not gonna go digging but what was the setup before? and what sub size?

[97gp]

not gonna go digging but what was the setup before? and what sub size?

Went from 12" Q in I think 2.2@32 or so on sundown sae-1000d to

15" BTL in 4.1@33 on the sundown and soon will be

15" BTL in 4.5@33 on something taht gives me 2000 watts.

[bhsdriller]

or have yours made.
http://i110.photobucket.com/albums/n104/fbi90909/100_0485.jpg

these were made for when i glassed an enclosure.

I think I remember this build from fiberglassforums....the xxx right

[_AnGeL_]

FGF crew :woot:

[fbi90909]

I think I remember this build from fiberglassforums....the xxx right

yup

[97gp]

And now it sounds like I have a gorilla beating on my trunk lid, I think I need to invest in some deadening maybe :wat:

[JimJ]

Hear me 'fore you see me?

[97gp]

I could only hope so

[fbi90909]

And now it sounds like I have a gorilla beating on my trunk lid, I think I need to invest in some deadening maybe :wat:

It might help but with a BTL you are better off adjusting the lock latch for the trunk to "pinch" the trunk closed. It'll make it a little harder to close the trunk lid but it'll reduce the movement and rattle.

[97gp]

Ill have to look into that and see if I can make that happen.

[ramos]

It might help but with a BTL you are better off adjusting the lock latch for the trunk to "pinch" the trunk closed. It'll make it a little harder to close the trunk lid but it'll reduce the movement and rattle.

so the model of the specific subwoofer changes what you need to deaden? What kind of deadener would one need for this ?


http://kalecoauto.com/images/motherofsubs.jpg

[IamDeMan]

so the model of the specific subwoofer changes what you need to deaden? What kind of deadener would one need for this ?


http://kalecoauto.com/images/motherofsubs.jpg

No lie, I was laughing.

[97gp]

No lie, I was laughing.

Why don't you guys make out already

[J31Bro]

I just meant actual flared ports...

Not PVC stuck in a round hole...

nG

I've never done that, but good advice is good.

Yah James. That's not what he meant :fyi:

:crap:

or have yours made.
http://i110.photobucket.com/albums/n104/fbi90909/100_0485.jpg

these were made for when i glassed an enclosure.

Lots of work for little result.. pretty though.

Same effect can be had this way:
http://i128.photobucket.com/albums/p170/J31Rob/12v/S5000492.jpg

Needs moar flair.

WOOOOOOO!

Someone mention a flare?

http://i21.photobucket.com/albums/b252/danniissexy/coney.jpg

:fap:

And now it sounds like I have a gorilla beating on my trunk lid, I think I need to invest in some deadening maybe :wat:
Second Skin Damplifier. Cheap & fucking NICE. I got 40sq feet of the black Damp and I've covered my trunk lid twice and have 30ish sq feet left. Ant is a great dude too, great customer service.

[JimJ]

Ant is a great dude too, great customer service.

lawl

[J31Bro]

lawl
lawl it up. I ordered my Damp over the phone & he threw shit in free son. :fyi:

[97gp]

Second Skin Damplifier. Cheap & fucking NICE. I got 40sq feet of the black Damp and I've covered my trunk lid twice and have 30ish sq feet left. Ant is a great dude too, great customer service.

Idk bro seems like there is a lot of hatred for that man, I wish I wouldn't have wasted the free pack I won of that stuff.

Also go to the thread I titled as you, I need some beats to test out on this thang make em around 33hz or so.

[J31Bro]

Link me. I'll put you a sick mixtape together bro. :fyi:

[IamDeMan]

Ant is a great dude too, great customer service.
:troll:

[97gp]

Link me. I'll put you a sick mixtape together bro. :fyi:

Why brah, all the thread says is for you to make me a mixtape with some dope ass fresh tracks so I just brought that thread up in hur!

[fbi90909]

so the model of the specific subwoofer changes what you need to deaden? What kind of deadener would one need for this ?


http://kalecoauto.com/images/motherofsubs.jpg

Sort of but it's also setup dependent. I forward fire my sub with it sealed from the trunk. A large portion of my trunk is deadened but my trunk lid isn't. No pressure goes to the trunk anymore so the only deadening I will be doing there would be the wheel wells.
He's going to need to deaden it for sure bur as a quick fix adjusting the latch can help as a temp fix until he gets some deadening.
As for that magical sub, I'm sure Tyatis going to require some second skins prototype space technology deadening.

[JimJ]

:troll:

What I'm sayin'.

[fbi90909]

Lots of work for little result.. pretty though.


No, they turned out fine. They were for a fiberglass enclosure I made. This wasnbefore your time.

[ramos]

lawl it up. I ordered my Damp over the phone & he threw shit in free son. :fyi:


I paid for everything I got from him at normal prices, then he got pissed cause I mailed him his sticker back with a note telling him I wasn't advertising his shit for free.

[jesus]

:laugh:

[J31Bro]

No, they turned out fine. They were for a fiberglass enclosure I made. This wasnbefore your time.

It wasn't before my time?

I paid for everything I got from him at normal prices, then he got pissed cause I mailed him his sticker back with a note telling him I wasn't advertising his shit for free.

Damn bro. I bet you felt empowered.

[jesus]

I'm the same way about clothes. My kids don't wear anything with a brand name all over it (i.e. Nike shirts, etc.).

[JimJ]

Damn bro. I bet you felt empowered.

lol

[ramos]

It wasn't before my time?



Damn bro. I bet you felt empowered.

Not quite the satisfaction of getting beat down by a fat chick, but pretty damn close.

[_AnGeL_]

ANT hooked my up with a free door pack of damplifier pro once....

[97gp]

Me to bro, along with the other 20 or so people who won.

[J31Bro]

Not quite the satisfaction of getting beat down by a fat chick, but pretty damn close.
Damn, 4 scratches total and that's a beat down. :run:

[_AnGeL_]

Me to bro, along with the other 20 or so people who won.

:hi5:

[ramos]

Damn, 4 scratches total and that's a beat down. :run:

4 scratches total from a girl ........ granted she looked like she ate everything on the menu but thank you and come again. But there is still the girl part of the equation. Throw in the fact she has a big enough sack to show up at your house. Yeah that's close enough.